| Gas Flow Rate | 1 to 5 Nl/min |
| Operating Pressure | 1 MPa (10 barg) with a high pressure option to 21 MPa (210 barg) available |
| Particulate Filter | 99.5% removal of 0.3 microns |
| Gas Connections | Quick Connect fittings for 6mm O/D plastic tubing or ¼” Swagelok® tube fittings (PTFE or FEP recommended) |
| Sample Tube | Supplied with 0.5m pig-tail vent tube, to prevent back-diffusion |
| Vacuum Rating | Standard push fittings are not vacuum rated |
| Construction Material | Block and Cap: 316 Stainless Steel Flow Control Block: Aluminium Couplings: Nickel plated Brass |
| Sensor Port | ⅝” UNF to support all Michell Instruments’ Impedance Sensors / Transmitters |
| Environmental | IP66 (NEMA 4) |
| Operating Temperature | -40 to +60°C (or as determined by sensor specification) |
| Storage Temperature | -40 to +70°C, 0-95% RH; non-condensing |
| Weight | 1.1kg (1.3kg with sensor installed) |
Dew-Point Sampler Self-Contained Sampling System
$138.00
A low-cost, self-contained sampling system, with filtration and flow control, for measurement of either pressure or atmospheric dew points.
